Wilka E204 easy 2.0 RFID double knob locking cylinder (lengths and prices on request)

The best locking cylinder we know when it comes to implants...

Our new locking cylinder in the Digiwell Edition. Ideal for all our Multipass implants (xNT, flexNT, NeXT, xSIID, xM1+, flexM1, flexPAY1, xDF2, flexDF2). 

This electronic locking cylinder replaces the existing mechanical cylinder on your door. The replacement is very simple; no door modification is necessary. Only the cylinder is replaced, not the entire door or lock!
An electronic solution can also be easily retrofitted into existing systems.

The cylinder comes standard with moisture protection IP67, making it ideal for outdoor use. 

What’s special is the modular design. This means you can adjust the cylinder length. So if you move, you can take the cylinder with you and adapt it to the new door thickness. Super simple.

With a standard battery, around 80,000 locking operations are possible, lasting up to 4 years (depending on the number of operations).

<iframe width="560" height="315" src="https://www.youtube.com/embed/fomhXtOYYZg" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Basic length:
-  30/30 mm, Total length: 60 mm

Version:
- Color: silver-colored
- Brushed stainless steel knob with black plastic cap, integrated evaluation electronics and battery
- Access authorization signaling via multicolored LED ring and acoustic signal via buzzer

Technical features:
- Patented safety ring for knob cap attachment
- Standard IP67 rating (suitable for outdoor use)
- Standard with drilling and pull protection
- Modular design
- With freewheel function (FZG)
- Certified according to SKG*** and tested according to EN 15684

Application area:
- Interior doors, exterior doors, apartment entry doors, front doors, etc... ideal in combination with implants... and if someone in the family doesn’t have an implant, there are RFID access cards or key fobs (keychain tags).

Scope of delivery:
- Mounting screw 
- Incl. lithium battery type CR2, 3V (for up to 80,000 locking operations or max. 4 years)
- User manual

Measuring instructions:

To determine the length, measure from the inner screw (used to secure the locking cylinder in the lock) to the outside fitting and then from the screw to the inside. Please measure as accurately as possible here, as the cylinder is custom-made. A later correction is possible due to the modular design, but not cost-neutral.

Important: For the first order you also need:
- a programming card!

Only one programming card is needed per system! If you already have a programming card, you can register it with the second cylinder.

Quick and easy installation

• Push out the old locking cylinder
• Insert the new cylinder
• Tighten the screw
• Attach the electronic module and screw on the knob. Done!

<iframe width="560" height="315" src="https://www.youtube.com/embed/U_Wd70KZ_Mc?rel=0" frameborder="0" allowfullscreen></iframe>

 Other versions of the cylinder available upon request. Just contact us: