Wilka RFID half cylinder for implants - Digiwell Edition

The best locking cylinder we know of when it comes to implants...

Our new locking cylinder in the Digiwell Edition. Ideal for multipass implants (xNT, flexNT, NeXT, xSIID*, xM1+, flexM1, flexPAY1, xDF2, flexDF2).

This electronic locking cylinder replaces the existing mechanical cylinder on your door. The replacement is very simple, no door modifications are necessary. Only the cylinder is replaced, not the entire door or lock!
An electronic solution can also be easily retrofitted into existing systems.

The cylinder is supplied with moisture protection IP67 as standard and is therefore ideally suited for outdoor use.

What’s special is the modular design. This means you can adjust the length of the cylinder. So if you move, you can take the cylinder with you and adjust it to the new door thickness! Super easy.

With a standard battery, approximately 80,000 locking operations are possible, lasting up to 4 years (depending on the number of operations).

<iframe width="560" height="315" src="https://www.youtube.com/embed/fomhXtOYYZg" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Base length:
- 30/10 mm

Version:
- Color: silver
- Knob: brushed stainless steel with black plastic cap, integrated evaluation electronics and battery
- Access authorization signaling: visual through multicolor LED ring and acoustic via buzzer

Technical features:
- Exterior knob electronic
- Patented security ring for knob cap fastening
- Standard with IP67 (suitable for outdoor use)
- Equipped with drill and pull protection
- Modular design
- With freewheel function (FZG)
- Certified according to SKG*** and tested according to EN 15684

Application area:
- Interior doors, exterior doors, apartment entrance doors, front doors, etc... ideal in combination with implants... and if someone in the family doesn’t have an implant, there are RFID access cards or keyfobs (keychain tags).

Scope of delivery:
- Double knob cylinder (electronic outside / mechanical inside)
- Mounting screw
- Including lithium battery type CR2, 3V (for up to 80,000 locking operations or max. 4 years)
- User manual

Measuring instructions:

To determine the length, measure from the inner screw that fastens the locking cylinder in the lock to the fitting on the outside and then from the screw to the inside. Please measure as carefully as possible, as the cylinder will be custom-made. Although subsequent correction is generally possible due to the modular design, it is not cost-neutral.

IMPORTANT: To program the cylinder you need a programming card once ! Please order it as well! The cylinder cannot be used without the card! The same applies to the mounting key.

If you already have a cylinder with a card and want to order another one, we need the system number of the existing cylinder. This is written on the card. Thank you

Quick and easy installation

• Push out the old locking cylinder
• Insert the new cylinder
• Tighten the screw
• Attach the electronic module and screw on the knob. Done!

<iframe width="560" height="315" src="https://www.youtube.com/embed/U_Wd70KZ_Mc?rel=0" frameborder="0" allowfullscreen></iframe>

Other variants of the cylinder are available upon request. Just contact us:

* depending on the color, there may be deviations in energy transmission. Yellow/white/red may have communication difficulties if the tag is not positioned well under the skin.